Fats and liquids in biscuits (2024)

How do you like your biscuits? Tall and tender, with a golden-brown bottom? Or do you like them a bit flatter and more sturdy, so you can toast and slather them with jam? As the baker, you get to decide how to adjust the fats and liquids in biscuits so they have just the right texture and taste.

When you start with a foolproof recipe like our Buttermilk Biscuits, it’s easy to customize the final result. While it’s certainly important to follow recipes closely while baking, you have some flexibility when it comes to choosing certain ingredients.

Fats and liquids in biscuits (1)

Choosing the fat for your biscuits

Let's start with the base of any good biscuit — the fat. Our original recipe calls for 4to 6tablespoons of butter or shortening. The higher amount will give you a richer, more buttery crumb. I decide to split the difference for testing purposes and use 5tablespoons (2 1/2 ounces).

Whenever we talk about fats in baking, we always hear from a portion of “lard-core bakers” (people who are dedicated to using lard). Customer feedback is something we take seriously here at King Arthur Flour, so we'll incorporate lard (as well as coconut oil) into our fat testing.

Fats and liquids in biscuits (2)

The butter version rises the highest — look at those flaky layers! The shortening biscuit is slightly shorter and a bit drier, too. Butter contains a bit of water, which helps create steam and gives baked goods a boost. (We discovered this to be true in our other explorations of butter vs. shortening, as well.)

The coconut oil biscuits are even shorter than the shortening biscuits, and the lard version is the squattest. Neither the coconut nor lard variationswin the beauty contest, either. They're a bit soft looking and don't have that desirable, craggy exterior that makes biscuits so appealing.

Fats and liquids in biscuits (3)

In addition to rising the highest, the butter version is also the brownest.

Why? Butter contains milk solids, which include sugars that caramelize at high temperatures. Shortening, coconut oil, and lard are all 100% fat. They contain no milk solids or sugars, so they don't caramelize in the same way. Still tasty, just less golden brown.

This preliminary finding of what adjusting fat in biscuits can do is exciting, but it's also just the beginning. On to liquids!

Fats and liquids in biscuits (4)

Selecting the liquid for your biscuits

Just as important as the fat is the liquid used to make your biscuits. Our Buttermilk Biscuitrecipe offers the choice of using milk or buttermilk. Buttermilk is known for making biscuits tender and adding a zippy tang, so we used that for this test.

Choices are important in baking, so we'll also test variations with full-fat sour cream, half & half, and heavy cream. (You can also use plain, full-fat Greek yogurt in place of sour cream if you like.)

Each liquid has a different amount of water, fat, milk solids, and acidity — all of which can change the flavor and texture of your biscuits.

To see the effects of each liquid, we make a batch of all-butter biscuits and change only the liquid —testing buttermilk, sour cream, heavy cream, and half & half. (We leave milk out of these tests since milk and half & half should yield very similar results, with the half & half biscuits just slightly more tender).

Fats and liquids in biscuits (5)

It’s surprising what changing just one ingredient can do! The heavy cream biscuit is slightly paler than the other three, while the half & half version is the evenly brown. The buttermilk and sour creamversions are somewhere in the middle in terms of color: nicely caramelized around the edges.

Fats and liquids in biscuits (6)

You might be wondering, well, what about the height? Surprisingly, all four biscuits are about the same height, with the buttermilk version just a smidge taller than the rest. Turns out that fat affectsthe height and flakiness of biscuits, while liquid impacts the color more noticeably.

Now we have a basic idea of what to expect when adjusting the fat and liquid in biscuits. Time to personalize your biscuits and choose your favorite combination!

Fats and liquids in biscuits (7)

Testing fats and liquids in biscuits

There's a bit of a baking frenzy in the test kitchen as I try out all the possible combinations of fat and liquid in biscuits. Here's what we find:

Fats and liquids in biscuits (8)

Shortening: Abit less flaky than some of the other versions but verytender — especially the heavy cream version: think melt-in-your-mouth texture.None of these has stand-out flavor though; they're a bit bland. Still, not bad overall.

Coconut oil: Slightly sweet flavor (though not coconut-y), most similar to butter in flavor. The texture of some of the higher-fat versions (heavy cream and sour cream) is a bit chewy/gummy.The bestcombination from this batch is coconut oil and buttermilk: delicate crumb and creamyflavor.

Fats and liquids in biscuits (9)

Lard:Savory aroma with a distinct taste (and aftertaste). In full disclosure, I'm a vegetarian so some trustworthy employee-owners taste this batch. They think these biscuits might be nice with a sauce (gravy) or spread. Thelard and half & half version seem to be the favorite here.

Since lard is such a rich ingredient on its own, it might be good to combine it with another fat, like butter, to balance flavor.

Fats and liquids in biscuits (10)

Butter:Slightly sweet, caramelized flavor; nicely browned exterior. All the liquid combinations produce fluffy, springy texture with an impressive rise. The butter and heavy creamversion makes a quintessential biscuit, suitable for all occasions.

But the one I can't get enough of? Butter and buttermilk biscuits. They're delightful in all ways you'd expect a biscuit to be, and a little lighter than their heavy cream counterpart. Butter/buttermilk biscuits are flaky, creamy, and downright comforting.

Fats and liquids in biscuits (11)

Finding your favorite combination

Just because my taste buds prefer aclassic butter and buttermilk biscuit doesn't mean yours will, too.

Don't be afraid to adjust the fats and liquids in biscuits the next time you're called into the kitchen to whip up a batch.

Fats and liquids in biscuits (12)

Gluten-free bakers, feel empowered to experiment, too. Use our Gluten-Free Measure for Measure Flour to replace the all-purpose flour in our Buttermilk Biscuit recipe. Adjust the fats and liquids until you find the perfectbalance of flavor and texture.

You might be surprised to find what your favorite combination turns out to be.Once you experiment with the fats and liquids in biscuits, let us know which you like best in comments, below.

Thanks to fellow employee-owner Seann Cram for taking the photographs for this post.

Fats and liquids in biscuits (2024)

FAQs

Fats and liquids in biscuits? ›

Ruhlman's ratio couldn't be simpler — 3 parts flour, 1 part fat, 2 parts liquid, with a little salt and baking powder to add flavor and leavening, respectively.

What fats are used in biscuits? ›

Four types of fat, namely palm oil, palm olein, palm mid-fraction, and butter, which vary in composition and solid fat content, were used to produce semi-sweet rich tea type biscuits.

What liquid is used in biscuits? ›

Just as important as the fat is the liquid used to make your biscuits. Our Buttermilk Biscuit recipe offers the choice of using milk or buttermilk. Buttermilk is known for making biscuits tender and adding a zippy tang, so we used that for this test.

Why do you use cold fat and liquids when making biscuits? ›

Biscuit Tip 1: Use cold ingredients

Those lumps get coated in flour and melt during baking into layers. If your fats are too warm, the lumps will melt and form a hom*ogeneous dough, resulting in dense, leaden biscuits.

What is the best liquid for biscuits? ›

Buttermilk adds a tangy flavor to the biscuits and makes them slightly more tender.

What fat makes the best biscuits? ›

High-fat butter, such as Kerrygold Butter, is best. The rich fat from the butter releases water when the biscuits are baking which is what contributes to the beautiful layers and flakiness that we love about biscuits.

What kind of oil is used in biscuits? ›

4) Vegetable Oils - Vegetable oils have been used for decades and it is the cheapest to manufacture cookies. The vegetable oils used in these factory-made biscuits are hydrogenated at very high temperatures. This process transforms oil in a liquid state to a solid state like appears like butter.

What form of fat is used in the biscuit method of mixing? ›

In the biscuit method, butter or other fat is cut into the flour mixture. Then the liquids are added. In the heat of the oven, the butter melts, the water in the butter creates steam, and the product rises into flaky layers.

What is the best emulsifier for biscuits? ›

Fats and water are not miscible. Emulsifiers, when used is small quantities improve the dispersion of aqueous phase of the dough. Lecithin is the most commonly used emulsifier in biscuits which is derived from soya beans.

What is the main ingredient in biscuits? ›

The main ingredients for biscuit making are flours, sugars and fats. To these ingredients, various small ingredients may be added for leavening, flavour and texture. The principle ingredient of biscuits is wheat flour. Wheat flour contains proteins including gliadin and glutenin.

Is it better to use butter or Crisco for biscuits? ›

Crisco may be beneficial for other baking applications, but for biscuit making, butter is the ultimate champion!

Why do you put lard in biscuits? ›

The stronger the bond, the tougher the crust and vice versa. Lard also has a higher melting point than butter, melting between 109 and 118° F while butter melts somewhere between 90 and 95° F. A slower render means more air and steam-release, which means more leavening and flakiness.

Why are my biscuits dense and not fluffy? ›

The reason: The butter has not been incorporated evenly, leaving pockets of your cooked biscuits that are dry, dense, and filled with flour. But even if you properly mix your biscuits, if your butter pieces are too large or inconsistently sized they may not get distributed evenly throughout the dough.

What is the secret to an excellent biscuit? ›

For flaky layers, use cold butter. When you cut in the butter, you have coarse crumbs of butter coated with flour. When the biscuit bakes, the butter will melt, releasing steam and creating pockets of air. This makes the biscuits airy and flaky on the inside.

What type of fat is used in biscuits? ›

Like vegetable shortening, lard is 100 percent fat; however, it does have a lower melting point and is especially great for baking projects where flakiness is the goal, such as pie crusts and biscuits.

Is buttermilk or heavy cream better for biscuits? ›

Buttermilk also adds a subtle tang. Cream biscuits are made with heavy cream. Cream biscuits are beloved because they're incredibly easy-to-make. But, since cream is much milder than buttermilk, they won't be quite as flavorful (unless you incorporate more spices and seasonings).

What type of fat is used in the biscuit method? ›

The biscuit method is the process of blending butter (or a fat of some kind) into flour so that it provides a flaky texture. Usually, this is done by combining flour and cold butter that has been broken down into pieces around the size of a pea, and then folding in a liquid to combine it all together.

What kind of grease do you use for biscuits? ›

The lard adds to the soft texture of the biscuit, and in a pinch you can use shortening or even solid bacon drippings or tallow.

What type of fat must be used to result in flaky biscuits? ›

Cold butter is less likely to mix into the flour and it will more easily form large flakes in the dough, which will lead to beautiful, pull-apart layers in your baked biscuits.

Is it better to use butter or lard in biscuits? ›

The stronger the bond, the tougher the crust and vice versa. Lard also has a higher melting point than butter, melting between 109 and 118° F while butter melts somewhere between 90 and 95° F. A slower render means more air and steam-release, which means more leavening and flakiness.

Top Articles
Latest Posts
Article information

Author: Saturnina Altenwerth DVM

Last Updated:

Views: 5475

Rating: 4.3 / 5 (44 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Saturnina Altenwerth DVM

Birthday: 1992-08-21

Address: Apt. 237 662 Haag Mills, East Verenaport, MO 57071-5493

Phone: +331850833384

Job: District Real-Estate Architect

Hobby: Skateboarding, Taxidermy, Air sports, Painting, Knife making, Letterboxing, Inline skating

Introduction: My name is Saturnina Altenwerth DVM, I am a witty, perfect, combative, beautiful, determined, fancy, determined person who loves writing and wants to share my knowledge and understanding with you.