May 10, 2021
Hint: one of the best ways to avoid common mistakes in homemade fudge is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade fudge is a creamy, delicious treat. Chocolate fudge is a standard favorite, and there are countless variations and flavor combinations that bring some excitement to the world of homemade fudge. Although some recipes seem relatively straightforward, many home cooks have trouble creating the perfect fudge from scratch. In this blog, we discuss some of the most common challenges people face when making homemade fudge. Of course, one of the best ways to avoid these missteps is to leave fudge making up to the experts at Wockenfuss Candies!
Homemade Fudge Doesn’t Always Set
Traditional fudge is made by heating sugar, butter, milk, and other ingredients until the mixture reaches the soft-ball stage. Home cooks usually use a metal saucepan to do the job, with the final hot mixture spread into a casserole dish or sheet pan to cool. However, homemade fudge doesn’t always set up into a semi-firm, melt-in-your-mouth confection. If your fudge doesn’t firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn’t reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.
Cooking in High Humidity Can Cause Problems
Just as altitude can create complications when baking, high humidity in the kitchen can lead to significant setbacks when making fudge. Humidity can cause fudge to boil over in the pan or stay soft when set, so try to avoid working on humid days if at all possible. If waiting for a less humid day isn’t feasible, you’ll need to boil your fudge at a slightly higher temperature than usual — or just order some delicious fudge from Wockenfuss!
Why Homemade Fudge Becomes Grainy
Even if your homemade fudge sets up to a nice firm consistency when cooled, you can still run into texture problems. Fudge becomes grainy and sugary when prepared incorrectly. Unfortunately, this is a common issue. To avoid grainy fudge, make sure that the sugar in your mixture dissolves entirely. This can require adjustments to your recipe or stirring technique.
How to Avoid Burning Your Fudge
As with any other confectionery endeavor, burning your fudge is a distinct possibility. Use a heavy-bottomed saucepan (some folks swear by copper pots) and stir the mixture constantly. Never leave your fudge unattended, and make sure to scrape the side of the pan as you stir. It’s hard (if not impossible) to save a burnt batch of fudge. Still, stopping by your nearest Wockenfuss Candies store is a surefire way to save the day!
A Wide Selection of Delicious Treats from Wockenfuss Candies
Head to WockenfussCandies.com and browse our wide selection of chocolates and candies; we promise you won’t be disappointed! Wockenfuss Candies is one of the oldest candy makers in Baltimore. We opened our doors in 1915 and have proudly served the people of Baltimore ever since. If you have any questions about our wide selection of chocolates, please contact Wockenfuss Candies by calling 1-800-296-4414 or email info@Wockenfusscandies.com. When you’re not savoring our sweets, stay satisfied by following us on Facebook, Twitter, and Pinterest!
This entry was posted on Monday, May 10th, 2021 at 2:21 pm.You can skip to the end and leave a response. Pinging is currently not allowed.
FAQs
Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done. Do not rely on the cooking time indicated in your recipe.
What not to do when making fudge? ›
Avoid Stirring Once the Mixture Comes to a Simmer
Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.
What is the secret to perfect fudge? ›
We'll say it again: resist stirring.
Fudge is a lesson in chemistry—and also a lesson in patience and restraint. After the mixture raches the soft-ball stage, you want to let the fudge cool to about 115° without stirring. Potential grainy moment: If you stir your fudge before it cools to 115 ° F crystals can form.
How do you save failed fudge? ›
The solution? A fudge do-over. Even though it set up properly, I threw it back into a saucepan with about 1 1/2 cups of water and gently heated the mixture to dissolve the fudge into the water. From there, I pretty much re-did the whole cooking process.
What is the secret to smooth fudge that is not gritty? ›
Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.
Why is my 3 ingredient fudge not setting? ›
Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.
What happens if you boil fudge too long? ›
Too cooked
The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).
Can you overmix fudge? ›
Rock Hard Fudge
Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock.
Should you stir fudge as it cools? ›
Without stirring or agitating the pot, allow the fudge to cool to 130°F (54°C)—or even lower! Harold McGee says that “candy texture is affected by the syrup temperature at which crystallization begins,” and this is the temperature where the seeds can form correctly.
Do you stir fudge when it's boiling? ›
Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
What does cream of tartar do in fudge? ›
Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!
What went wrong with my fudge? ›
If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.
How do you cut fudge so it doesn't break? ›
How To Cut Fudge
- allow the fudge to set in the fridge for a minimum of 3 hours.
- remove the fudge from the fridge and place onto a flat chopping board.
- dip a large sharp flat knife in boiling water, dry it completely and cut one long slice (the heat will help the knife to glide through)
The ingredients for fudge are combined and cooked to 234 degrees, cooled to 110 degrees without stirring, then beaten until creamy. Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard.
How can you tell if fudge is bad? ›
Signs That Your Fudge Has Gone Bad
While fudge has a relatively long shelf life, it's important to know when it's past its prime. Signs of spoilage include a dry, crumbly texture, discoloration, and an off smell or taste.
What happens if you over stir fudge? ›
Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.
What would cause fudge not to harden? ›
The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.
Was fudge made by mistake? ›
That appetite for fudge dates back more than a century. Food historian Joyce White says fudge is based on a recipe for chocolate caramels, which was very similar. "What probably happened is that there was someone in Baltimore, messed it up, or 'fadged' it," she said. "Fadge is a word that means you messed up.
