For most households, the cleanliness of their carpets is a high priority because carpets are the most important decoration of the house. At the same time, it is a real challenge to keep the carpet sanitized all the time. For this reason, with the help of modern science and technology, various methods of sanitizing carpets have been developed.
These methods of sanitizing are divided into two main groups: with and without water. Although both procedures can provide deep sanitizing of carpets, some people prefer one over the other. This article deals exclusively with the latter, without water, and shows you the different techniques of this type of sanitizing.
Why Sanitizing Carpets without Water
There are several reasons that may lead one to opt for dry sanitizing instead of the usual washing methods. It is important to consider these factors before deciding on a suitable method. Otherwise, one may mistakenly choose the wrong approach.
Here are three reasons for sanitizing carpets without water
- Carpets made of delicate hydrophobic materials such as silk fibers, sisal, and jute should be sanitized without water.
- Dry sanitizing is highly recommended to prevent the development of mold and mildew.
- Washing a carpet with water is more time and energy-consuming than dry sanitizing.
Dry Methods for Sanitizing Carpets
There are several ways to sanitize a carpet without water. Some of these methods are even more practical than sanitizing the carpet by washing. Not only can you use dry methods, but sanitizing companies also offer services that do not use water, such as steam cleaning in Greensboro. Below you will find the dry sanitizing methods considered to be efficient.
1. Upholstery Cleaning in Greensboro
Although this method is regularly used for sanitizing furniture, it is also a convenient and effective strategy for sanitizing carpets. It is a special use of air-powered turbo vacuums that completely remove dust, dirt, and grime. Sanitizing companies like upholstery cleaning in Greensboro also offer this service to their customers.
2. Vacuuming the Carpet
Using a vacuum cleaner is the most typical way to sanitize carpets. They have become an essential household appliance that must be used regularly, at least once a week. Vacuuming carpets is considered the easiest and most popular method for dry sanitizing. Below are some tips to help homeowners vacuum their carpet effectively:
- Be patient while slowly vacuuming all areas
- Move the vacuum along the fibers of the carpet
- Focus the vacuum on high-traffic areas where more dust accumulates, such as the living room and stairs.
- Try to vacuum your home every three days
- Empty the vacuum bag after vacuuming
3. Steam Cleaning
This method is a top-rated service offered by carpet washing companies. Due to the effectiveness of this sanitizing procedure, many households, especially those who want dry carpet sanitizing, prefer it. And since it requires different types of equipment and a lot of time, many hire carpet sanitizing companies like steam cleaning in Greensboro to do the job.
4. Bonnet Sanitizing
Bonnetting is explicitly used for surface sanitizing of the carpet. This method uses a heavy, motorized machine with a spinning pad and disinfecting solutions to produce a stain-free carpet surface. It is widely used in hotels and guesthouses because it is the best solution for quick, labor-saving, and effective carpet sanitizing.
As the saying goes, “haste makes waste,” the haste of bonnet sanitizing is not without its drawbacks. Since only the upper parts of carpets are sanitized, they will get dirty after a short time. This means that the procedure should be repeated regularly to maintain the sanitized surface.
5. Deodorize the Carpet with Vinegar
In this way, one uses a scrub brush and vinegar to sanitize the carpet by hand. The main advantage of vinegar is that it removes the slime from the carpets. First, one needs a bucket with ¼ cup of white vinegar and hot water. Then they start scrubbing the carpet until it gets a little wet. The procedure makes the carpet smell fresh and colorful.
6. Baking Soda
Soda is universally used as a sanitizing agent for various types of fabrics, carpets, and even tires. Even though it sounds straightforward, soda offers a lot of benefits to give carpets a shiny look. This method consists of 6 steps, which are explained below:
- Get rid of all noticeable dirt particles.
- Vacuum the carpet
- Sprinkle the baking soda on the carpet
- Brush the carpet
- Leave the soda to soak for one night
- Remove the baking soda and the accumulated dirt with the vacuum cleaner
7. Using Shampoos
Carpet shampooing is a traditional method of sanitizing carpets. Although shampooing can sanitize dirty carpets, it leaves a large amount of wet foam on the carpet that takes a long time to dry. Even as the foam dries from the surface, it becomes gummy since it is not rinsed. This temporary result of carpet shampooing makes this technique less favorable than others.
All Things Considered
As mentioned earlier, sanitizing carpets, and especially keeping them sanitized, is no easy task. When push comes to shove, you can accomplish this task using more convenient and economical procedures. And dry methods are one way to make carpet sanitizing easier for everyone. Using water-based carpet sanitizing methods may seem more effective than dry methods at first glance. However, the fact is that some dry methods, such as steam cleaning in Greensboro, also prove to be extremely beneficial.
Choosing the right method among the dry carpet sanitizing methods mentioned above depends entirely on the person’s situation. Our final suggestion is that no matter which method you choose, always remember to try it out on an inconspicuous area before doing it completely. Wait for the result. If you feel the result is healthy, continue with the procedure to sanitize your carpet.
